Skip to content

Cart

 

Internally Threaded

When you receive your piece, it will be inserted into the labret bar. Follow the steps below to put it on correctly:


STEP 1: Separate the jewel from the bar by unscrewing the jewel to the left, counterclockwise.
STEP 2: Insert the bar into your piercing from back to front, pushing the flat disc until the bar sticks out at the front.

STEP 3: Screw the jewel back onto the bar, turning the jewel clockwise.

STEP 4: Once the jewelry thread is completely inside the bar, make sure it is tight.

 


*If you want to remove the jewelry, repeat STEP 1.